Stout Products

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock grapple, the grapple you receive may have variations depending on the options you choose.

Made Entirely with high strength 50,000 psi Steel!

• Weight:
  • 480 lbs unit
  • 515 lbs shipping 
• Bucket Width 66"
• Height - 33"
• Depth - 38"
• 9" tine spacing
• Grapple opening 32"
• Grapple width 15"
• Grapple pivots fully grease-able
• 1/2" Flat Face couplers
• Hoses Fully Encased in Protective Sleeves
• Hose Keeper
• Hydraulic Cylinders automatically adjust to uneven loads
• Hydraulic Cylinders
  • Bore x Stroke - 2" x 8"
  • 2500 Working PSI
  • Fully Grease-able Pivot Points
• For use on wheel skid steer with less than 1600 lb lift capacity
  
• Made Entirely of Grade 50 Steel
• Made in USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos show stock grapple; received grapple may vary with options.

Made Entirely with high strength 50,000 psi Steel!

•  Weights:
  • 665 lbs. Unit
  • 700 lbs. Shipping
• Bucket Width - 72"
• Height - 30" 
• Depth - 38"
• 8" Tine Spacing
• Grapple Opening 32"
• Grapple Width 18"
  
• Grapple Pivots are grease-able
• 1/2" Flat Face Couplers
• Hoses are fully encased in protective sleeves
• Hose Keeper
• Hydraulic Cylinders Automatically Adjust to Uneven Bucket Loads When Closing
• Hydraulic Cylinders
  • Bore x Stroke - 2" x 8"
  • 2500 Working PSI
  • Fully Grease-able Pivot Points
• Great general purpose grapple.
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock grapple, the grapple you receive may have variations depending on the options you choose.

Made entirely with high strength 50,000 psi Steel!

Stout's XHD Brush grapple with 4" tine spacing is available in 72" width and is equipped with two grapples.  The bucket tines are 3/8" thick with the outer tines on each end of the bucket being 1/2" thick and all tines stand approximately 4" tall.  The top and bottom square tubes that make up the rear frame are 3"x3" and the forward tube behind the tine spreader in 2.5" diameter.  The grapple arms are 1/2" thick and connected with a 3/8" web making for a very durable grapple.  All pivot points are fully grease-able and hoses are fully sleeved for protection and held in place with a hose keeper.

• Weights
  • 865 lbs. Unit
  • 900 lbs. Shipping
• Height - 30"
• Depth - 38"
• 4" Tine Spacing
• Tine thickness - 1/2" End Tines, 3/8" Middle Tines
• Grapple Opening 32"
• Grapple Width 18"
• Grapple Pivot Points Fully Grease-able
• Mount Specs are J2513, the Skid Steer Universal Quick Attach
• 1/2" Flat Face Couplers
• Hoses are Fully Encased in Protective Sleeves
• Hose Keeper
• Hydraulic Cylinders Automatically Adjust to Uneven Bucket Loads When Closing
• Hydraulic Cylinders
  • Bore x Stroke - 2"x8"
  • 2500 Working PSI
  • Fully Grease-able Pivot Points
• Made Entirely of Grade 50 Steel
• Made in the USA

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock grapple, the grapple you receive may have variations depending on the options you choose.

Made with all high strength 50,000 psi Steel!

•  Weight
  • 910 lbs. Unit
  • 945 lbs. Shipping
• Depth - 38"
• Height - 30"
• Bucket Width - 84"
• 6" Tine Spacing
• 1/2" Tine Thickness
• Grapple Opening 32"
• Grapple Width 21"
• Fully Grease-able - Grapple Pivots and Cylinder Pivots
• All hoses fully sleeved for protection
• Hose keeper block the hold hoses away from pinch point
• 1/2" Flat Face Couplers
• Hydraulic Cylinders Automatically Adjust to Uneven Bucket Loads When Closing
• Hydraulic Cylinder Covers/Guards included
• Hydraulic Cylinder pivots Fully Grease-able
• Hydraulic Cylinders
  • 2" Bore
  • 8" Stroke
• Universal Skid Steer Quick Attach Mount - J2513 Specifications
• One Tough Grapple
• Made entirely of Grade 50 Steel!
• Made in the USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock grapple, the grapple you receive may have variations depending on the options you choose.

Made with high strength 50,000 psi Steel!

Stout's Add-on Grapple is a great choice to turn a material bucket into a grapple bucket.  The Add-on Grapple is mounted to a 4"x25"x1/2" steel plate that you can either weld of drill and bolt into place. You can either get one grapple or two to mount on your bucket depending on your needs.  Hydraulic hose are optional, the cylinders are plumbed with 3/8" NPT and you can make hoses at a local shop to the length you need.  There are Large and Small Hydraulic Cylinder Hose Kits that allow you to spread the grapples as far as you need to and bring the hose coupling to a center tee to equip hoses that would connect to your machine.

•  Shipping Weight
  • One Grapple Approx - 160 lbs
  • Two Grapples Approx - 285 lbs
• Dimensions - One Grapple - 25"x30"x13"
• Approximate Grapple inside dimensions 19"x12"
• Grapple Specs
  • Width - 19"
  • Web thickness - 3/8"
  • Tine thickness -  1/2"
  • Cylinder mount thickness - 3/4"
• 1/2" High Strength Steel Mounting Bar
• 1/2" Flat Face couplers are an available option (one male and one female)
  • 1/2" NPT thread
• Hydraulic Cylinders
  • Bore x Stroke 2"x8"
  • 3/8" NPT Ports
  • 2500 PSI Working Load
• Hydraulic Hoses are and available option
  • 1/4" JIC female fittings on all hoses
  • 1/4" JIC male tee connectors
  • 3/8" NPT to 1/4" JIC reducers from cylinder to hoses
  • 1/4" JIC to 1/2" NPT reducers from hoses to couplers
• Grapple Hose Kit
  • 2 - 28" Hoses
  • 2 - 36" Hoses
  • 2 - 1/4" JIC tees
  • 4 - 3/8" NPT to 1/4" JIC Reducers
• Two Grapple Coupler Hose kit
  • 2 - 82" Hoses
  • 2 - 1/4" JIC to 1/2" NPT Reducers
  • 1 - 1/2" Male/Female Flat Face Coupler Set
• Single Grapple Coupler Hose Kit
  • 1 - 90" Hose
  • 1 - 96" Hose
  • 2 - 3/8" NPT to 1/4" JIC Reducers
  • 2 - 1/4" JIC to 1/2" NPT Reducers
  • 1 - 1/2" Male/Female Flat Face Coupler Set

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock bucket, the bucket you receive may have variations depending on the options you choose.

Made Entirely of High Strength 50,000 PSI Steel

Stout Skid Steer Rock Buckets are available in 69" 72" 78" and 82" widths and have bolt on removable sides as an option.

• Weight - Approximate
  • 69" - 575 lbs
  • 72" - 595 lbs
  • 78" - 640 lbs
  • 82" - 665 lbs
• Depth - 41"
• Height - 22"
• Tine Thickness - 3/8"
• 3" Tine Spacing
  
• Shown with optional side plates
• Made Entirely of Grade 50 Steel
• Made in the USA!

 FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock bucket, the bucket you receive may have variations depending on the options you choose.

Made Entirely with High Strength 50,000 PSI Steel!

Stout's general purpose Material buckets have a single bevel welded in cutting and universal skid steer quick attach mount plate. 

• Weights Approximate
• 60" - 455 lbs
• 66" - 465 lbs
• 72" - 475 lbs
• Depth - 31"
• Height - 20"
• 3/8" Stiffeners
• 3/16" Sides and Bucket
• 3/4"x6" Welded On Single Beveled Cut Edge
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Photos are of a stock bucket, the bucket you receive may have variations depending on the options you choose.

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Made Entirely with high strength 50,000 psi Steel

Stout's snow buckets work well for snow removal or any light material applications such as garden mulch or sawdust.  Our snow buckets are available in three widths, 72", 84", and 96" with a single welded in edge.

• Weights Approximate
• 72" - 695 lbs
• 84" - 790 lbs
• 96" - 865 lbs
• Depth - 46"
• Height - 31"
• 3/16" Stiffeners
• 3/8" Back Plate
• Capacity Approximate
• 72" - 0.92 yd.
• 84" - 1.07 yd.
• 96" - 1.22 yd.
• Wear bars on bottom of bucket 4" wide x 1/4" thick
• 72" - 3 wear bars
• 84" - 5 wear bars
• 96" - 5 wear bars
• Single Weld-on Cut Edge
  
• Made Entirely of Grade 50 Steel
• Made in USA!

FREE SAME DAY SHIPPING

Photos are of a stock bucket, the bucket you receive may have variations depending on the options you choose.

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Made Entirely with High Strength 50,000 PSI Steel

Stout's snow buckets work well for snow removal or any light material applications such as garden mulch or sawdust.  Our snow buckets are available in three widths, 72", 84", and 96" with a bolt on edge that can be reversed.

• Weights
• 72" - 695 lbs.
• 84" - 790 lbs.
• 96" - 865 lbs.
• Capacity
• 72" - 0.92 yd.
• 84" - 1.07 yd.
• 96" - 1.22 yd.
• Height and depth - 31"x46"
• 3/16" Side Stiffeners
• 3/8" Back Plate
• Wear bars on bottom of bucket 4" wide x 1/4" thick
• 72" - 3 wear bars
• 84" - 5 wear bars
• 96" - 5 wear bars
• 3/4"x6" Welded in Cutting edge with bolt Pattern
• 1/2"x6" Bolt-On Double Bevel Reversible Edge
• Made Entirely of Grade 50 Steel
• Made in USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of Stock Fork Frame, the Fork Frame you receive may have variations depending on the options you choose

Made Entirely with High Strength 50,000 PSI Steel!

• Weight 450 lbs. (approximate with 48" forks)
• Dimensions
  • Width - 46"
  • Depth - 6.5" (Frame only)
  • Height - 36" 
• Forged Fork Rail
• Side Step
• Class 2 Fork Specifications 
• Fork options - 48", 60", or 72"
  • 48" forks rated at - 4000 lbs. at 24"
  • 48" forks rated at - 5500 lbs. at 24"
  • 60" forks rated at - 5500 lbs. at 24"
  • 72" forks rated at - 5500 lbs. at 24"
• Heavy Duty See-Through Spill Guard
• 6-Position Pin Fork Spacing Adjustment
• Made Entirely of grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock Fork Frame, the Fork Frame you receive may have variations depending on the options you choose.

Made Entirely of High Strength 50,000 PSI Steel 

• Weight 450 lbs. (approximate with 48" forks)
  
• Dimensions
  • Width - 46"
  • Depth - 6.5" (Frame only)
  • Height - 36"
    
• Forged Fork Rail
  
• Side Step
• Class 2 Fork Specifications
• Fork Options - 48", 60", or 72"
  
  • 48" forks rated at - 4000 lbs. at 24"
    
  • 48" forks rated at - 5500 lbs. at 24"
  • 60" forks rated at - 5500 lbs. at 24"
    
  • 72" forks rated at - 5500 lbs. at 24"
    
• Walk-Through Spill Guard with Side Step
• 6-Position Pin Fork Spacing Adjustment
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Photos are of a stock grapple, the grapple you receive may have variations depending on the options you choose.

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Made Entirely with High Strength 50,000 PSI Steel!

• Weight: 260 lbs
• Fits 1-3/8"x4" Forks ONLY
• Grapple Opening 51"
• Grapple Width 16" x 29" Closed
• 1/2" Flat Face Couplers
• Hydraulic Cylinder
  • Bore x Stroke - 2"x8"
  • 2500 Working PSI
• Hose Keeper
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Photos are of a stock grapple, the grapple you receive may have variations depending on the options you choose.

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Made with high strength 50,000 psi Steel!

• Weight 710 lbs. with 48" Forks and Grapple
• 48"x46"x36"
• 48" Forks
• rated at 4000 lbs. at 24"
• Grapple Opening 51"
• Grapple Width 16" x 29" Closed
• Heavy Duty See-Through Spill Guard with Side Step
• 6-Position Pin Fork Spacing Adjustment
• Forged Fork Rail
• Class 2 Fork Specifications

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of stock bucket, the bucket you receive may have variations depending on the options you choose.

Made Entirely with High Strength 50,000 PSI Steel!

• Weight- 350 lbs
• Overall Dimensions
  • Width - 48"
  • Height - 20"
  • Length - 55"
    
• Serrated Sides for Cutting Through Roots
• Bucket Dimensions
  • Bucket Length - 53" 
  • Bucket width at Cutting Edge - 15" 
  • Bucket Width at Hitch Plate - 21"
  • Bucket Height - Max of 17"
• 3 Weld-On Teeth With Replaceable Tips
• Made Entirely of Grade 50 Steel
• Made in USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a Stock Grinder, the Grinder you receive may have variations depending on the options you choose.

Made Entirely with High Strength 50,000 PSI Steel!

• Weight: 615 Lbs.
• 45-1/2"(L) x 37"(W) x 40"(H)
• 26" Wheel Diameter
• 20 Carbide Cutting Teeth
• 11" Below Ground Depth
• 15-20 Max GPM Hydraulic Flow
• 1/2" Flat Face Couplers 
• Mount Specs are J2513, the Skid Steer Universal Quick Attach
• Made Entirely of Grade 50 Steel
• Made in USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of Stock Grinder, the Grinder you receive may have variations depending on the options you choose.

Made Entirely with High Strength 50,000 PSI Steel!

• Weight: 625 lbs.
• 45-1/2"(L) x 37"(W) x 40"(H)
• 26" Wheel Diameter
• 20 Carbide Cutting Teeth
• 11" Below Ground Depth
• 20-30 Max GPM Hydraulic Flow
• Mount Specs are J2513, the Skid Steer Universal Quick Attach
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

• Teeth Only (20 Total)
  
• 15 Right
• 2 Straight
• 3 Left

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock post puller, the product you receive may have variations depending on the options you choose. 

Made Entirely with High Strength 50,000 PSI Steel

• Weight: 350 lbs
• 48"x28"x21
• 24" Jaw Length
• 12" Jaw Opening
• Jaw Pivot Points Fully Grease-able
• 1/2" High Strength Steel On Jaws
• 3" Tube Jaw Supports
• 1" Tube Frame Supports
• Mount Specs are J2513 - the Skid Steer Universal Quick Attach
• 1/2" Flat Face Couplers
• Hose Keeper
• Hydraulic Cylinder
  • Bore x Stroke - 2"x8"
  • 2500 Working PSI
• Made Entirely of Grade 50 Steel
• Made in USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock bale spear, the product you receive may have variations depending on the options you choose. 

• Weight: 280 lbs
• 3-Prong Spears
• Bolt-On Replacement Spears
• (1) main spear 2"x48"
• (2) side spears 1-1/4"x18"
  

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Made Entirely with High Strength 50,000 PSI Steel!

• Weight- 128 lbs
• 2" Receiver Tube
• Mount Specs are  J2513, the Skid Steer Universal Quick Attach
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

 Call for a quote if shipping to Canada, Alaska, or Hawaii.

Made Entirely with High Strength 50,000 PSI Steel

• Weight: 115 lbs
• 45"x22"x3"
• High Strength 1/4" Steel Plate
• Solid "Full-Back" hitch plate designed to weld on
• Mount Specs are J2513, the Skid Steer Universal Quick Attach
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Made Entirely of High Strength 50,000 PSI Steel

• Weight: 98 lbs
• 45"x22"x3"
• Quick attach plate to weld on an attachment with a damaged or different style of hitch
• Mount Specs are J2513, the Skid Steer Universal Quick Attach
• Made Entirely of Grade 50 Steel
• Made in the USA!

FREE SAME DAY SHIPPING

Photos are of a stock Cutting Edge, the Cutting Edge you receive may have variations depending on the options you choose.

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Stout Skid Steer Material and Snow Bucket Replacement cutting edges are available in four widths, 72" 78" 84" and 96"  These are replacement edges for a Stout Material. and Snow Buckets that came with a bolt on edge.  These have double bevel edges and are reversible so you can rotate it after one side has worn.  Hole spacing is important, a Stout 72" 84" and 96" bucket will have 11" hole spacing and a Stout 78" bucket will have a 9" hole spacing... any other spacing means the holes were drilled aftermarket into one of our single edge buckets or it is not a Stout Bucket.

• Weight - Approximate
• 72" - 58 lbs
• 78" - 63 lbs
• 84" - 68 lbs
• 96" - 75 lbs
• Hole Spacing
• 72" - 11"
• 78" - 9"
• 84" - 11"
• 96" - 11"
• Width - 6"
• Thickness - 1/2"
• New Hardware Included
• Reversible 

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

• Weight- 17 lbs
• 18.25" Retracted
• 8" Stroke
• 1-1/8" Rod Diameter
• 3/8 NPTF Port
• 7,854 lbs Column Load
• 1" Pin Diameter 
• Tie Rod/Clevis Style

FREE SAME-DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

• 4 threaded Pucks
• 15 Right Teeth
• 2 Straight Teeth
• 3 Left Teeth
• Replacement Hardware

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii. 

Photos are of a stock bucket, the bucket you receive may have variations depending on the options you choose.

Made Entirely with High Strength 50,000 PSI Steel!

Stout Tooth Buckets are available in 72" 78" and 84" widths and are an excellent option for mid range or moderate digging needs.  

• Weights Approximate
• 72" - 540 lbs
• 78" - 560 lbs
• 84" - 595 lbs
• Approximate Depth - 41"
• Approximate Height - 20"
• 3/8" Stiffeners
• 3/16" Sides and Bucket
• 3/4" x 6" Cutting Edge Welded into Bucket
• 3" x 3" Top Tube
• Bolt-on Digging Tooth bar
• 72" - 8
• 78" - 9
• 84" - 9 
• Replaceable pin on Tooth Tips
• Universal Quick Attach Mount - J2513 Specifications
• Optional - Add 1/2" x 6" Double Bevel Replacement Wear Edge to Install When Not Using Tooth Bar
• Made Entirely of Grade 50 Steel!
• Made in USA!

FREE SAME DAY SHIPPING

Call for a quote if shipping to Canada, Alaska, or Hawaii.

Photos are of a stock bucket, the bucket you receive may have variations depending on the options you choose.

Made Entirely with High Strength 50,000 PSI Steel!

• Weights Approximate
  • 72" - 535 lbs.
  • 78" - 570 lbs.
  • 84" - 605 lbs.
• 32" Deep
• 20" Tall
• Widths - 72", 78", or 84"
• Wear Bars - 4"W x 1/4" T
  • 72" - 3 Wear Bars
  • 78" - 3 Wear Bars
  • 84" - 4 Wear Bars
• 3/8" Stiffeners
• 3/16" Sides and Bucket
• 3"x3" Top Tube
• 3/4"x6" Welded in Cutting edge with bolt Pattern
• 1/2"x6" Bolt-On Double Bevel Reversible Edge
  
• Universal Quick Attach Mount - J2513 Specifications
  
• Optional - Bolt-on Digging Tooth bar with replaceable pin on Tooth Tips
  • 72" - 8 Teeth
  • 78" - 9 Teeth
  • 84" - 9 Teeth
• Made Entirely of Grade 50 Steel
• Made in USA!