4 products
Stout Skid Steer Stump Grinder High Flow with Skid Steer Quick Attach
Regular price $4,099.00 Sale price $4,049.00 Save $50.00FREE SAME DAY SHIPPING
Call for a quote if shipping to Canada, Alaska, or Hawaii.
TrackClaws for Skid Steers and Mini Excavators
Regular price $999.00 Save $-999.00FREE SAME DAY SHIPPING
Call for a quote if shipping to Canada, Alaska, or Hawaii.
Photos show stock products; received product may vary with options.
TrackClaws are an innovative new way to increase the traction your compact track loader or mini excavator has, if you have a skid steer or mini excavator with rubber tracks you know how easy it is to slide on snow, ice, or mud especially on slopes or hillsides. TrackClaws grip the outsides of your tracks and hold a chain across the face of the track, the chain provides the bite needed for your machine to not slip or spin. TrackClaws can be added or removed in minutes, come with a tool box for storage and handling, a spare bolt, and a 1/2" drive Allen socket for installation. If your skid loader is equipped with tracks you know what's it's like to sit and spin in the snow and your option was to buy another set of tracks that "do better" in snow. Not anymore, now you can install TrackClaws and gain back the use of you machine!
Equipment needed:
3/8” Allen wrench or socket (Socket Preferred, included with purchase) and hammer or mallet.
Chains are in sets with an inside clamp and outside clamp with Allen bolt. Keep Allen bolt to outside.
Operation:
Be sure Allen bolts do not come loose. Bolts should be checked before you start using your machine each day and retightened as needed.
Proper Clearance:
Step 1: Check inside and outside of track for proper clearance for the TrackClaws clamp, the clamps should not come into contact with any part of the track drive system, frame of the machine, or anything other than the track itself.
Step 2: Install one TrackClaws on each track, ensure proper clearance by driving the machine at least one full revolution in both forward and reverse. (Having someone available to watch/listen to making sure nothing is coming in contact with the TrackClaws is recommended.)
Installation:
Step 1: Measure your track circumference/length. Take the total length and divide that by 5 (the number of TrackClaws per track) and that will be the spacing of the TrackClaws on the track. Typically about three feet apart.
Step 2: Hook the static clamp of the TrackClaws on the inside of the track and pull it snuggly so the clamp is seated in the tread “valley.” You may need to use mallet to snug onto track.
Step 3: Slide the tension clamp into a tread valley opposite of the static clamp. (Depending on your track style, the chain may run diagonal or straight across the track face.) Tap the clamp snuggly into place with mallet.
Step 4: Put the Allen head bolt with its lock washer through the bushing on the tension clamp and start it into the nut on the chain by hand. Only after the bolt is started by hand should you use an impact to tighten, do not over tighten and curl the track. (Note: use caution if tightening with an impact, the chain can spin and pinch causing injury)
Step 5: Ensure all Allen head bolts are tightened and check clearances in both forward and reverse directions ensuring the TrackClaws do not come in contact with anything other than the trackClaws
"Limited Edition" Stout Skid Steer XHD 5470 Brush Grapple with Skid Steer Quick Attach and Grade 70 Steel
Regular price $3,499.00 Save $-3,499.00FREE SAME DAY SHIPPING
Call for a quote if shipping to Canada, Alaska, or Hawaii.
Photos show stock grapple; received grapple may vary with options.
The XHD 5470 Brush Grapple is the strongest brush grapple offered by Stout, it features 1/2" thick bucket tines and has been offered by Stout and loved by its users for years. Known to most as the XHD 84-6 this has been a "no frills" grapple that has cut its teeth doing hard jobs around the country, such as tearing out Mesquite down in Texas, cleaning up after hurricanes along the gulf coast, and one happy customer even bought extensions to make his 12 feet wide! After all this we still got requests to make this grapple even stronger, well, you asked and we answered! In this Limited Edition model we made the bucket tines from a Grade 70 steel that offers a 70,000 psi yield strength to help prevent the tines from bending in even the most extreme uses. Now with frills! this grapple has grease zerks on the cylinders, a hose keeper, hose sleeves on all hoses, and better than even steel backing it up! This is a limited run so supply of these grapples will run out.
Berlon Forestry Claw for Skid Steer
Regular price $5,499.00 Sale price $5,299.00 Save $200.00FREE SAME DAY SHIPPING
Call for a quote if shipping to Canada, Alaska, or Hawaii.
Photos are of a Forestry Claw, the Forestry Claw you receive may have variations depending on the options you choose.
The Berlon Full Size Forestry Claw is must have tool for cleaning up brush and limb piles. With a 60" claw opening brush and limb clean up is a breeze and at 375 lbs. most of your lift capacity is available for what you are picking.
The best attachments you can buy delivered free and fast to your door.
"Awesome company to deal with. Grapple was delivered to my door within a week. Quality built product, I will buy some other attachments from this company."
- Ranald Cameron
Avoid the logistics and wasted time. Get the attachment you have been looking for in minutes with a click.